TL1000S front end

Das Forum für alle Fahrwerksthemen zur Gixe

Moderator: Georg

Antworten

Themenstarter
mlivkovich
neuer User
neuer User
Beiträge: 3
Registriert: 25. Jul 2018 09:31

TL1000S front end

Beitrag von mlivkovich » 24. Sep 2018 22:04

Just finished my project! I put tl1000s front end on my GSX. Springs are too soft so I ordered new stiffer ones. Also, my plan is to fabricate fork extensions to maintain standard front end height.
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.


Klausgsx1400
Profi User
Profi User
Beiträge: 1369
Registriert: 25. Apr 2011 08:09
Bike: B/W GSX 1400
aka: Einbauküchentreiber
Wohnort: Sindelfingen-Darmsheim
Alter: 56

Re: TL1000S front end

Beitrag von Klausgsx1400 » 25. Sep 2018 06:40

hallo :wave:
the front looks nice :thumbup:
i hope you have some picuteres from the work !!
what you have done with the muffler and the footrest :think:
i thing you hav a lot of work :angel: :wave: before you finished this bike :wave:

Benutzeravatar

KIZ
User
User
Beiträge: 186
Registriert: 31. Mai 2011 06:52
Bike: GSX 1400 K3 + B-King
Wohnort: Lüneburg
Alter: 30
Kontaktdaten:

Re: TL1000S front end

Beitrag von KIZ » 25. Sep 2018 07:19

Hi, look very good, how Long is the fork?

The "S" from 97-00 should be 732mm, thats good!

i try to fit the zzr1400 in which is 742mm


Themenstarter
mlivkovich
neuer User
neuer User
Beiträge: 3
Registriert: 25. Jul 2018 09:31

Re: TL1000S front end

Beitrag von mlivkovich » 26. Sep 2018 14:47

TL1000S forks are 732 mm long but front end is still sitting too low. It's 7 cm shorter. I will machine extensions to maintain standard front end height.
I lowered footpegs 3 cm and put 4-1 exhaust collector but still using right OEM exhaust can

Benutzeravatar

KIZ
User
User
Beiträge: 186
Registriert: 31. Mai 2011 06:52
Bike: GSX 1400 K3 + B-King
Wohnort: Lüneburg
Alter: 30
Kontaktdaten:

Re: TL1000S front end

Beitrag von KIZ » 26. Sep 2018 15:18

7cm?

the original ist 780mm ...mayby another oil with other viscosity ??
or another bubble wrap


Themenstarter
mlivkovich
neuer User
neuer User
Beiträge: 3
Registriert: 25. Jul 2018 09:31

Re: TL1000S front end

Beitrag von mlivkovich » 26. Sep 2018 16:48

I measured 800mm each fork leg off the bike, on work bench. 780mm is on sidestand? I use 10w fork oil in both USD and standard ones.

Benutzeravatar

KIZ
User
User
Beiträge: 186
Registriert: 31. Mai 2011 06:52
Bike: GSX 1400 K3 + B-King
Wohnort: Lüneburg
Alter: 30
Kontaktdaten:

Re: TL1000S front end

Beitrag von KIZ » 27. Sep 2018 06:48

I changed the front wheel on my b-king from 17 to 18 inches.

The problem was now that the front Wheel has contact with the cooler when its full weight loaded

we used 10w oil and changed the air cushion in the fork

Antworten