TL1000S front end
Moderator: Georg
-
Themenstarter - User
- Beiträge: 13
- Registriert: 25. Jul 2018 09:31
TL1000S front end
Just finished my project! I put tl1000s front end on my GSX. Springs are too soft so I ordered new stiffer ones. Also, my plan is to fabricate fork extensions to maintain standard front end height.
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
-
- Super Moderator
- Beiträge: 1827
- Registriert: 25. Apr 2011 08:09
- Bike: B/W GSX 1400
- aka: Einbauküchentreiber
- Wohnort: Sindelfingen-Darmsheim
- Alter: 62
Re: TL1000S front end
hallo
the front looks nice
i hope you have some picuteres from the work !!
what you have done with the muffler and the footrest
i thing you hav a lot of work before you finished this bike
the front looks nice
i hope you have some picuteres from the work !!
what you have done with the muffler and the footrest
i thing you hav a lot of work before you finished this bike
-
- User
- Beiträge: 224
- Registriert: 31. Mai 2011 06:52
- Bike: GSX14/ GSX1400R/ B-King /R1
- Wohnort: Lüneburg
- Alter: 36
- Kontaktdaten:
Re: TL1000S front end
Hi, look very good, how Long is the fork?
The "S" from 97-00 should be 732mm, thats good!
i try to fit the zzr1400 in which is 742mm
The "S" from 97-00 should be 732mm, thats good!
i try to fit the zzr1400 in which is 742mm
-
Themenstarter - User
- Beiträge: 13
- Registriert: 25. Jul 2018 09:31
Re: TL1000S front end
TL1000S forks are 732 mm long but front end is still sitting too low. It's 7 cm shorter. I will machine extensions to maintain standard front end height.
I lowered footpegs 3 cm and put 4-1 exhaust collector but still using right OEM exhaust can
I lowered footpegs 3 cm and put 4-1 exhaust collector but still using right OEM exhaust can
-
- User
- Beiträge: 224
- Registriert: 31. Mai 2011 06:52
- Bike: GSX14/ GSX1400R/ B-King /R1
- Wohnort: Lüneburg
- Alter: 36
- Kontaktdaten:
Re: TL1000S front end
7cm?
the original ist 780mm ...mayby another oil with other viscosity ??
or another bubble wrap
the original ist 780mm ...mayby another oil with other viscosity ??
or another bubble wrap
-
Themenstarter - User
- Beiträge: 13
- Registriert: 25. Jul 2018 09:31
Re: TL1000S front end
I measured 800mm each fork leg off the bike, on work bench. 780mm is on sidestand? I use 10w fork oil in both USD and standard ones.
-
- User
- Beiträge: 224
- Registriert: 31. Mai 2011 06:52
- Bike: GSX14/ GSX1400R/ B-King /R1
- Wohnort: Lüneburg
- Alter: 36
- Kontaktdaten:
Re: TL1000S front end
I changed the front wheel on my b-king from 17 to 18 inches.
The problem was now that the front Wheel has contact with the cooler when its full weight loaded
we used 10w oil and changed the air cushion in the fork
The problem was now that the front Wheel has contact with the cooler when its full weight loaded
we used 10w oil and changed the air cushion in the fork